Nonmetal Laser Cutting Machine

Main Feature of laser cutting machine：

1. Focusing is simple , can do it by touching two button, takes only 3 seconds.

2. English version Laser cut software supporting 10 commonly used graphic formats.

3. DSP off-line control with USB port interface.     

4.Taiwan HIWIN square linear guide rail installed on X&Y axis, make sure the works stably and precisely.

5.The professional manufacturers adopts square tube framework in China, with more than 40% higher fuselarge strength than iron sheet structure.

 This design prevents the machine from quivering, resonance and distortion during long term work.

6.New-style high-efficiency laser tube is adopted. Laser beam is more stable than the traditional type. Usage is more than 10000 hours.

7.Air asist ,we will provide you one set air compressor, you can turn up/down the switch between the laser head to control the strength of air blowing. To avoid getting fired and blow away the dusk /smoke.

8.Exhaust fan&vacuum table, this pulls fumes and debris away from the work piece; the resulting vacuum is strong enough to straighten and flatten thin materials against the work table for cutting and engraving in good focus.

9.Advanced DSP control system, with professional motion control chip, has the function of consecutively 

high-speed curve cutting and the shortest path selection, which largely improves your working efficiency.            

10.Automatic up-down table can be chosen for thick materials and high objects.

11.Un-limited feed-through door , we can only add the auto-feeding system allows the use of roll material and unlimited sheet length.