Laser cleaning is a process in which a laser beam is emitted from a laser cleaning machine. And the handheld will always be pointed at a metal surface with any surface contamination. If you receive a part full of grease, oil, and any surface contaminants, you can use this laser cleaning process to remove it all.
The first step is to just look at everything visually. It is important to understand where the rust has accumulated and in which direction it is moving in order to really get rid of it with a laser cleaner.
So how does laser cleaning actually work? The laser cleaning machine has a certain frequency. As soon as its frequency is established in the laser source, it is fired from a hand pistol. As soon as it is aimed at your workpiece, it will resonate with impurities on the surface of the metal. Metal surfaces are the last resort and will not absorb light. This way, anything above the metal surface will actually absorb the light from the laser cleaner. As soon as it touches anything on the surface of the metal, the heat actually removes contaminants from the surface of the metal. Or, were it not for pressure or heat, the laser beam itself would vaporize the material from above. It happens in milliseconds… nanoseconds.
As with any laser cleaning machine, this is a beam of light that also generates a lot of heat. You may damage the surface of the substrate, which is metal. So you always want your tool or handgun to always be in motion. You don’t want to leave it in one particular place or in one place for too long, as you can damage the metal if you leave it in one place for too long.
Its real advantage is that it does not damage the substrate, i. metal surface. So if you’re working on a machined area, like engine internals, anything around any bodywork for a very, very detailed restoration project, even something historical, you don’t want to damage that base. This is where laser cleaning comes in.
Therefore, laser cleaning technology is developing very rapidly. Many companies or manufacturers are starting to connect them to robots and their production lines. Even after something has been made, in any industry there is still some leftovers, garbage or something that needs to be removed for further processing.
Post time: Dec-15-2022
