Regular maintenance and service of the fiber laser cutting machine is the key to ensure that it maintains high precision for a long time. Here are some key maintenance and service measures:
1. Clean and maintain the shell: Regularly clean the shell of the laser cutting machine to ensure that there is no dust and debris on the surface to prevent dust from entering the machine and affecting the normal operation of the equipment.
2. Check the laser cutting head: Keep the cutting head clean to prevent debris from blocking the laser beam and check whether the fixing screws are tightened to avoid displacement.
3. Check the transmission system: Regularly check whether the motor, reducer and other components are working properly, keep the transmission system clean, and replace worn parts in time.
4. Check the cooling system: Ensure that the coolant is unobstructed, replace the coolant in time, and keep the cooling system clean.
5. Check the circuit system: Keep the circuit system clean, check whether the power supply is stable, and avoid debris or water stains from corroding the cable or circuit board.
6. Replacement of circulating water and cleaning of water tank: Regularly replace the circulating water and clean the water tank to ensure that the laser tube is full of circulating water.
7. Fan cleaning: Regularly clean the fan to avoid dust accumulation affecting exhaust and deodorization.
8. Lens cleaning: Clean the reflector and focusing lens every day to avoid dust or contaminants damaging the lens.
9. Guide rail cleaning: Clean the machine guide rail every half a month to ensure high processing accuracy.
10. Tightening of screws and couplings: Regularly check and tighten the screws and couplings in the motion system to ensure the smoothness of mechanical movement.
11. Avoid collision and vibration: Prevent equipment damage and fiber breakage, and ensure that the temperature and humidity of the equipment working environment are within the specified range.
12. Regularly replace wearing parts: Regularly replace wearing parts according to the equipment usage time and actual wear to keep the equipment in good working condition.
13. Regularly calibrate the optical path system: Ensure the collimation and stability of the laser beam, and calibrate according to the equipment manual or manufacturer’s recommendations.
14. Software update and system maintenance: Update the control software and system in time, perform system maintenance and backup, and prevent data loss and system failure.
15. Suitable working environment: Keep the equipment in a suitable temperature and humidity environment, avoid too much dust or serious air pollution.
16. Reasonable setting of the power grid: Ensure that the power of the power grid matches the needs of the laser cutting machine, and reasonably set the working current to avoid damage to the laser tube.
Through the above measures, the service life of the fiber laser cutting machine can be
effectively extended and its high-precision performance can be maintained.
Post time: Aug-24-2024
