Big Discount Co2 Galvo Laser - Mini Portable Laser Machine for cutting, welding and clean – Rezes

Product Display

Technical parameter

Main Parts for Machine

Main function of machine

The three-in-one laser welding and cleaning machine can cut, weld and clean metals without purchasing multiple laser equipment separately. It is suitable for welding stainless steel and aluminum alloys, and can also weld carbon steel, titanium alloys, etc., and can also be used for welding. Rust removal and hand-held metal cutting. For cleaning of metal rust, paint, oil and coatings, saving cost and space.

It can weld a variety of metal plates and pipes, mainly suitable for welding stainless steel, gold, silver, copper, galvanized sheet, aluminum sheet, various alloy sheets, rare metals and other materials.

Copper alloy surface patina cleaning, steel pipe surface oxide and pollutant cleaning, rail derusting.

Widely used in advertising signs, hardware products, auto parts, craft gifts and other industries, can be used for welding carbon steel, stainless steel, titanium, aluminum and other metal materials.

About usage of machine

1.Product Structure

2.Pipe connection

3.Fiber input installation

Maintenance of Laser head

1. Fiber laser lens :

Operating method and cautions: Tool: dust-free gloves or dust-free fingertips, dust-free cotton swab, isopropy alcohol and canned dry pure compressed air. Spray the isopropyl alcohol onto the dust-free cotton swab, make the lens face your eyes, gently pinch the side edge ofthe lens with the thumb and forefinger of your left hand, wipe the front and back ofthe lens in one direction from left to right or from top to bottom with dust-free cotton swab held in the right hand ( remember not to wipe the lens back and forth to avoid the second contamination), and blow the surface of the lens with dry pure compressed air to ensure there is no dust on the lens.

Disassembly of focusing lens:

Tool: 2mm inner hexagon wrench, clean cotton swab, alcohol and masking tape The assembly and disassembly of lens should be operated with hands wearing dust-free gloves or fingertips in clean environment.

Steps Step 1: loosen M4 screw with a 2mm inner hexagon wrench. Step 2: pull out ofthe focusing module horizontally Step 3: seal the port with masking tape to stop dust from entering the cavity to cause contamination. Step 4: the cover is gently pressed down and rotated 90°.Align the two convex places with the left and right openings. Take out the cover upward and the protective lens can be changed. (Note: install lens in concave and convex direction.)